The right fender had a lot of issues.

The wheel well has been poorly fixed long time ago. I have to wait until the car is soda blasted before seeing the extend of the damage.

Another ugly part...

The antenna hole needs to be erased.

Under a thick coat of bondo, I found holes that were plugged. Probably from a former rear view mirror. Instead of grinding the metal, someone just plastered a ton of bondo over it.

I have just added some metal and grinded the excess.

Some self-etching primer will protect the metal while waiting further work.

Some rust at the bracket connecting the fender to the end of the bumper.

I will seal the welds later with a brush on sealer.

Believe it or not, the fender was welded to the chassis with a home made bracket.

The bracket to the bumper was cut and welded higher. The fender was resting on a stack of washers.

After being sealed and painted, this should look good again.